Hubbed RF Slip On Welding Steel Pipe Flanges

Hubbed RF Slip On Welding Steel Pipe Flanges
Product Introduction:
Hubbed RF slip on welding steel pipe flanges
Send Inquiry
Description
Technical Parameters

slip on flanges

pipe flanges fittings

raise face flanges

Products:Hubbed RF slip on welding steel pipe flanges

1, Product Introduction of Hubbed RF slip on welding steel pipe flanges
Definition: A flat welding flange with a short neck. The pipeline is inserted into the inner diameter of the flange and fixed to the pipeline through double-sided fillet welds (on the outside of the flange neck and on the back of the flange) to achieve a detachable connection.
Structural features:
Short neck design: Compared to plate welding (PL), it has stronger rigidity and pressure bearing capacity, reducing deformation.
Welding method: fillet welding (non groove welding), simple construction and low cost.
Sealing surface: commonly used RF (protruding surface), FF (flat surface), suitable for gasket sealing.
Advantages and Disadvantages of Hubbed RF slip on welding steel pipe flanges
✅ Advantages: Easy installation, low cost, better rigidity than PL flanges, strong applicability to medium and low pressure.
❌ Disadvantages: Not suitable for high temperature/high pressure/severe temperature cycling; The weld seam is a fillet weld, and its fatigue strength is lower than that of a welded (WN) flange.
Typical applications: water supply and drainage, fire protection, HVAC, chemical medium and low pressure pipelines, oil and gas transportation, municipal engineering, etc.

2, Specification and model of Hubbed RF slip on welding steel pipe flanges
1. Nominal diameter (DN/NPS)
National standard/Ministry of Chemical Industry: DN15-DN2000 (commonly used DN15-DN600).
American standard ASME B16.5: NPS 1/2 "~24" (corresponding to DN15- DN600).
2. Pressure level
National standard (PN, unit MPa): PN6, PN10, PN16, PN25, PN40 (commonly used PN10/16).
American standard (Class, in psi): Class 150, 300, 600, 900, 1500 (commonly Class 150/300).

3, Material of Hubbed RF slip on welding steel pipe flanges
According to the operating conditions (pressure, temperature, medium corrosiveness), the mainstream materials are as follows:
1. Carbon Steel
Commonly used: Q235B, 20 #, A105, 16Mn (Q345B).
Low temperature: A350 LF2 (-46 ℃).
Applicable: Water, gas, medium and low pressure pipelines at room temperature.
2. Stainless Steel
Commonly used: 304, 304L, 316, 316L, 321.
Dual phase steel: 2205 (S31803) (resistant to chloride ion corrosion).
Applicable: chemical, food, pharmaceutical, seawater, acid-base media.
3. Alloy Steel
Commonly used: 15CrMo, 12Cr1MoV, F11, F22 (high temperature resistance, 450-600 ℃).
Applicable: boilers, steam pipelines, and high-temperature process pipelines.

ASTM A105 ANSI B165 SLIP ON RAISE FACE CLASS 150 FLANGEASTM A105 ANSI B165 SLIP ON RAISE FACE CLASS 300 FLANGEASTM A105 ANSI B165 SLIP ON RAISE FACE CLASS 400 FLANGE

ASTM A105 ANSI B165 SLIP ON RAISE FACE CLASS 600 FLANGEASTM A105 ANSI B165 SLIP ON RAISE FACE CLASS 900 FLANGEASTM A105 ANSI B165 SLIP ON RAISE FACE CLASS 1500 FLANGE

 

Hot Tags: hubbed rf slip on welding steel pipe flanges, China hubbed rf slip on welding steel pipe flanges manufacturers, suppliers, factory, Carbon Steel Blind Flange

Send Inquiry
you dream it, we design it
We will find it for you as soon as possible
The product you need
contact us