|
Product |
carbon steel reducer fittings 3 inch to 1.5 inch reducer |
|
Material |
Carbon steel: A234WPB, A420 WPL6 St37,St45, E24, A42CP, 16Mn, Q345, P245GH,P235GH, P265GH, P280GH, P295GH, P355GH ASTM 860 WPHY42, WPHY52, WPHY60, WPHY65,WPHY70, WPHY80 and etc. |
|
Stainless steel:A403 WP304,WP304L,WP316,WP316L,WP321 etc |
|
|
Alloy steel: A234 WP11,WP22,WP5,WP9,WP91, 10CrMo9-10, 16Mo3,12CrMoV,15CrMo etc. |
|
|
Wall Thickness |
SCH10,SCH20,SCH30,SCH40, SCH60, SCH80, SCH160, XXS |
|
Size |
1/2"-24" seamless, 24"-96" welded |
|
Standard |
GB, ANSI B16.9, EN10253-2, DIN2605, GOST17375-2001, JIS B2313, MSS SP 75,ASTM A234 etc |
|
Place of origin |
Tianjin,China |
|
Package |
Wooden box,wooden pallet or bare |
|
Surface |
Painted,Bare,Galvanized,FBE,3LPE Coated etc |
|
Application |
Chemical , power, construction, petroleum, gas, water, steam, |
|
Advantage |
Customerized dimensions to meet different requirement quality control from raw materials to the final products Abundant stock Rich export experience Good price |
|
Delivery |
By sea, By air and By express |
|
Lead time |
According to the quantities and specifications of each order; |
Stamping forming - a forming method for carbon steel reducer fittings 3 inch to 1.5 inch reducer
In addition to using steel pipes as raw materials to produce carbon steel reducer fittings 3 inch to 1.5 inch reducer, some specifications of reducers can also be produced using steel plates through stamping forming technology. The shape of the die used for stretching is designed based on the inner surface dimensions of the reducer, and the steel plate after cutting is stamped and stretched into shape using the die.
Structural characteristics
The material of the carbon steel reducer fittings 3 inch to 1.5 inch reducer is carbon steel, and the expression method is to multiply the diameter of the large head by the diameter of the small head by the thickness.
Reducing pipe standards: national standard, American standard, British standard, and various non-standard high-pressure stamping
The shrinkage forming process of reducing pipes is to place a pipe blank with the same diameter as the large end of the reducing pipe into a forming mold, and through compression along the axial direction of the pipe blank, the metal moves along the mold cavity and shrinks into shape. Depending on the size of the reducing pipe diameter change, it can be divided into one-time compression forming or multiple compression forming
The characteristics of reducing pipes are significantly higher strength than carbon steel with the same carbon content, good toughness and plasticity, as well as good weldability and corrosion resistance
Hot Tags: 3 inch to 1.5 inch reducer, China 3 inch to 1.5 inch reducer manufacturers, suppliers, factory, reducer for sorting different sized pipes, sorting different sized pipes with reducer fitting, 2 Inch To 40mm Reducer, fitting to classify pipe diameters, reducing fitting for differentiating pipes, resizing pipe with reducer fitting
