| Products |
natural gas line tee fitting |
| Standard |
ASTM A403 |
| Steel Grade | WP304,WP304L,WP316,WP316L,WP321 etc ASTM A403/ASTM A403M-2018 is standard specification for wrought austenitic stainless steel piping fittings. |
Natural gas line tee fitting standard requirements:
All natural gas line tee fitting shall have the welders, welding operators,and welding procedures qualified under the provisions of Section IX of the ASME Boiler and Pressure Vessel Code except that starting pipe welds made without the addition of filler metal do not require such qualification.
All joints welded with filler metal shall be finished in accordance with the requirements of Paragraph UW-35 (a) of Section VIII, Division I, of the ASME Boiler and Pressure Vessel Code.
natural gas line tee fitting machined from bar shall be restricted to NPS 4 or smaller. Elbows, return bends, tees, and header tees shall not be machined directly from bar stock.
Natural gas line tee fitting chemical composition:
The chemical composition of each cast or heat used shall be determined and shall conform to the requirements of the chemical composition for the respective grades of materials listed in Table 2. The ranges as shown have been expanded to include variations of the chemical analysis requirements that are listed in the various specifications for starting materials (pipe, tube, plate, bar, and forgings) normally used in the manufacturing of fittings to this specification. Methods and practices relating to chemical analyses required by this specification shall be in accordance with Test Methods, Practices, and Terminology A 751. Product analysis tolerances in accordance with Specification A 480/A 480M are applicable


Hot Tags: natural gas line tee fitting, China natural gas line tee fitting manufacturers, suppliers, factory, stainless steel tee
