High Quality Manufacturer Carbon Steel Seamless Elbow Fittings

High Quality Manufacturer Carbon Steel Seamless Elbow Fittings
Product Introduction:
Seamless elbows account for roughly 80% of all fittings used across a typical pipeline system, making elbow quality one of the most decisive factors in overall system reliability. Tianjin Baode Steel Co., Ltd. produces these fittings in-house using hot-pressing, stamping and mid-plate welding processes selected according to material and wall thickness, giving engineering buyers a single, traceable source for elbows across a wide diameter and pressure range.
Send Inquiry
Description
Technical Parameters

Core Benefits

In-house hot-pressing forming line

produces uniform wall thickness across the bend, reducing the risk of localized thin spots that lead to premature failure under pressure.

Dedicated stamping process for thick-wall/small-batch elbows

lets us serve non-standard wall-thickness orders without the long lead times typical of mainstream mills.

Mid-plate welding capability for DN700 and above

means large-diameter bends for municipal and power projects don't need to be outsourced separately.

Full-range size coverage from 1/2" seamless up to 48" welded

one supplier can cover both your small branch lines and your main distribution runs.

ISO 9001 / ISO 14001 / ISO 45001 certified production

gives your QA team a documented management-system basis for supplier approval.

Exported to 40+ countries and regions

production, packing and documentation are already proven for international project shipments.

Technical Specifications

Material Grade ASTM A234 WPB, 20# carbon steel Forming Process Hot-pressing / stamping / mid-plate welding (DN700+), selected by size and wall thickness
Angle 45°, 90°, 180° MOQ 1 piece
Bend Radius Long Radius (LR) and Short Radius (SR) Standard Lead Time 15 working days for stocked configurations; up to 30 days during peak season
Outer Diameter 1/2"–24" (seamless); 18"–48" (welded) Warranty 1 year, excluding damage caused by improper operation or installation
Wall Thickness 2mm–60mm Container Loadout 20GP: approx. 18–22 tons (in standard wooden cases); 40HQ: approx. 26–28 tons
Connection Butt-weld (BW) ends, dimensions per ASME B16.9

Note: sizes, wall thickness and material grades above reflect our standard carbon steel elbow production range; exact specification for your project is confirmed at order stage based on drawing/standard requirements.

Manufacturing Process & Advantages

 

Hot-Pressing Forming - Uniform Wall Thickness, Fewer Weak Points

Our hot-push line uses a dedicated elbow-pushing machine and core mold to heat, expand and bend the pipe blank in one continuous motion. Because the core mold controls how metal at the inner arc compensates for thinning elsewhere, the finished elbow keeps a consistent wall thickness around the entire bend - this is the process most mills rely on for standard carbon and alloy steel elbows, and it is our default forming route for bulk orders.

product-576-276

 

 

Stamping Forming - Covers Thick-Wall & Small-Batch Requirements

For elbows with unusually thick or thin walls, or order quantities too small to justify a hot-push run, we press the tube blank directly in a mold using a matched outer die and inner core. This route is more cost-effective for one-off and non-standard orders, so buyers with special wall-thickness requirements don't have to pay a large-batch premium just to get their spec produced.

product-690-358

 

 

Mid-Plate Welding - Large-Diameter Bends Without Outsourcing

For elbows at DN700 and above, we press half-sections with a mid-plate and weld the two halves together in-house. Buyers sourcing large-diameter carbon steel bends for municipal water or power piping can therefore get both their standard and oversized fittings from one supplier and one QC process, instead of splitting the order across two factories.

product-692-330

Optional Configurations

Angle & Radius

45° / 90° / 180°, in Long Radius (LR) or Short Radius (SR)

Size Range

1/2"–24" seamless; 18"–48" welded; wall thickness 2mm–60mm

 

Material

ASTM A234 WPB or 20# carbon steel

product-702-550

Surface Treatment

Galvanizing / epoxy coating / powder coating / phosphating available on request

Forming Route

Hot-pressing (standard/bulk) or stamping (thick-wall/small-batch)

 

Packaging

Wooden case for small items; wooden pallet for large/bulk items

Application Scenarios

 

01

Oil & Gas Pipeline Systems

Buyers in this sector need fittings that hold up to pressure cycling without weak points at the bend. Our hot-pressed elbows keep wall thickness consistent around the arc, and full seamless coverage from 1/2" to 24" lets one order cover both gathering lines and main transmission runs.

02

Power Generation & Thermal Pipelines

Steam and condensate lines in power plants demand fittings that can be traced back to a documented QMS. Every elbow we ship is produced under ISO 9001 / ISO 14001 / ISO 45001 certified processes, giving your procurement team the paperwork trail plant audits require.

03

Chemical & Petrochemical Processing

Corrosive media and wide temperature swings are the main concern here. Alongside the standard WPB grade we can apply epoxy or powder-coated surface treatment, and support large-diameter (DN700+) mid-plate welded elbows for main process lines.

04

Municipal Water & Construction Infrastructure

Large-diameter water mains need bends produced without outsourcing part of the run. Our in-house mid-plate welding line handles DN700-and-above elbows, so contractors can source both the branch fittings and the oversized bends from a single factory.

OEM / ODM Support

We accept OEM/ODM cooperation for buyers who need custom branding, packaging, or drawing-based dimensions outside our standard range. Typical process:

 
modular-1

 

01

Drawing Review

Submit spec/drawing for feasibility check

modular-2

 

02

Sample/Quote

Confirm process route and pricing

modular-3

 

03

Production

Hot-press/stamping/mid-plate welding as required

modular-4

 

04

QC & Shipment

Wood case/pallet packing per container loadout

Factory Strength & Certifications

 

Tianjin Baode Steel Co., Ltd. was established in 2006 and officially renamed to its current name in 2019. The factory sits within the "China Pipeline Equipment Manufacturing Base," with the Bohai Sea to the east and the Beijing–Shanghai Railway to the west, giving smooth logistics access for both domestic and export shipments. Production covers seamless and butt-welded elbows, tees, reducers, caps, flanges and related pipeline accessories, manufactured to domestic and international standards.
Tianjin Baode Steel factory production line

 

  Elbow pushing & forming workshop 

 

Baode Steel ISO certification Baode Steel quality certificate Baode Steel environmental certificate Baode Steel occupational health and safety certificate


Frequently Asked Questions

Q1: What material grade is this carbon steel elbow made from?

A: Standard production is ASTM A234 WPB or 20# carbon steel. For low-temperature service we also produce ASTM A420 WPL6 elbows on request - please confirm your service temperature when inquiring.

Q2: What size range can you produce, seamless vs. welded?

A: Seamless elbows from 1/2" to 24", welded elbows from 18" to 48", with wall thickness from 2mm to 60mm, in 45°/90°/180° and LR/SR configurations.

Q3: What is the MOQ and standard lead time for bulk orders?

A: MOQ is 1 piece. Standard lead time is 15 working days for common sizes, extending up to 30 days during peak season or for non-standard wall thicknesses.

Q4: How is the elbow protected from corrosion during shipping and storage?

A: We offer galvanizing, epoxy coating, powder coating and phosphating as optional surface treatments; items are packed in wooden cases (small parts) or on wooden pallets (bulk/large items) to prevent transit damage.

Q5: What is your warranty and after-sales support policy?

A: Products carry a 1-year warranty, excluding damage caused by improper installation or operation. Our export team supports replacement-part sourcing and technical questions after delivery.

Q6: Can you produce large-diameter elbows (DN700+) for municipal or power projects?

A: Yes - for DN700 and above we use in-house mid-plate welding, pressing half-sections and welding them together, so oversized bends don't need to be outsourced separately.

 

Q7: Do you support OEM/ODM or drawing-based custom elbows?

A: Yes, we accept OEM/ODM cooperation including custom branding and drawing-based dimensions. Submit your drawing or spec through the inquiry form and our team will confirm feasibility, pricing and lead time.

 

Need a quote or sizing help for your project?

Tell us your size, material grade and quantity - we'll confirm lead time and pricing within one business day.

Send Inquiry Now Contact Us

 

Hot Tags: high quality manufacturer carbon steel seamless elbow fittings, China high quality manufacturer carbon steel seamless elbow fittings manufacturers, suppliers, factory, carbon steel elbow for chemical industry, carbon steel elbow manufacturer, astm carbon steel elbow, ansi carbon steel elbow, imperial carbon steel elbow, cheap carbon steel elbow

Send Inquiry
you dream it, we design it
We will find it for you as soon as possible
The product you need
contact us