2 Inch Stainless Steel 90 Degree Elbow

2 Inch Stainless Steel 90 Degree Elbow
Product Introduction:
The main difference between stainless steel elbows and carbon steel elbows is the material, and the chemical composition it contains will keep the surface of the elbow from rusting or corrosion for a long time.
Send Inquiry
Description
Technical Parameters

ASME B16.9 Stainless Steel 90° Elbow for Corrosive Process Lines

Available in grades 304 through 321, machined to standard B16.9 dimensions, and shipped with a mill-issued 3.1 test certificate on every batch.

Chromium content ≥18% resists chloride pitting in CIP and marine service, cutting elbow turnover versus carbon steel fittings.
Grades 304, 304L, 316, 316L, 321 stocked; duplex stainless steel available on request for chloride-heavy or higher-strength applications.
Manufactured to ASME/ANSI B16.9, with dimensional cross-reference to DIN/EN, JIS, and GOST for mixed-standard piping systems.
Every shipment carries an EN 10204 3.1 Mill Test Certificate, tracing each heat number to chemistry and mechanical test results.
Third-party inspection by SGS, BV, or TÜV can be scheduled before container loading, independent of our in-house QC pass.
Produced on a 32-year-running line with 500+ staff and 400+ production lines - this size typically ships from floor stock, not a queued custom run.
 
 
2 inch stainless steel 90 degree elbow ASME B16.9 for process piping
 
 

Technical Specifications

Material & Standards
Dimensional Data
Procurement Info
 
Nominal Size
2 inch (NPS 2 / DN50)
Angle
90°
Material Grades
304, 304L, 316, 316L, 321 (duplex stainless steel available on request)
End Connection
Butt-weld (BW), per ASME B16.9 fitting geometry
Manufacturing Standard
ASME/ANSI B16.9
Cross-Reference Standards
DIN/EN (German/European), JIS (Japanese), GOST (Russian)
Mill Test Certificate
EN 10204 3.1, issued with every shipment
Third-Party Inspection
SGS, BV, or TÜV - available on request before loading

Core Features & Advantages

2 inch stainless steel elbow chromium nickel alloy surface
Corrosion Resistance from Chromium-Nickel Alloy

This elbow is alloyed with chromium and nickel at a combined content above 20% (Feature). That composition forms a passive oxide layer on the bore surface, which resists pitting and crevice corrosion in chloride-bearing fluids far better than plain carbon steel (Advantage). In chemical transfer lines and coastal installations, this means fewer unplanned replacements and lower total piping cost across the service life of the line, even though the per-unit price runs higher than a carbon steel equivalent (Benefit).

 
B16.9-Compliant Geometry for Drop-In Installation

Center-to-end dimensions and OD are held to ASME/ANSI B16.9 tolerances for NPS 2 fittings (Feature). Because the geometry is cross-checked against DIN/EN, JIS, and GOST tables during design, the elbow fits piping isometrics built around any of these four standards without field re-cutting (Advantage). Installation crews avoid re-measuring or re-ordering fittings mid-project when a line was specified to a non-ASME standard (Benefit).

90 degree stainless steel elbow ASME B16.9 dimensions
 
stainless steel elbow mill test certificate traceability
Traceable Quality Through Mill Certification

Every batch ships with an EN 10204 3.1 Mill Test Certificate covering chemical composition and mechanical properties by heat number (Feature). That paper trail lets your QA team match a specific delivery back to its melt and test data instead of relying on a general compliance statement (Advantage). For projects that require SGS, BV, or TÜV sign-off before loading, that inspection can be arranged directly against the same heat records (Benefit).

Application Scenarios

Click a card to see the fit for that industry.

Chemical & Petrochemical
Food & Beverage
Marine & Offshore
Water Treatment
Pharmaceutical Utility Lines
Chemical & Petrochemical Processing

Transfer lines in this sector carry acids, solvents, and chloride-bearing process fluids that pit carbon steel within a few operating cycles. A 316/316L elbow in this bore size holds up under repeated CIP cycles and intermittent chemical exposure, and the EN 10204 3.1 certificate lets your plant engineer log the exact heat number into the piping isometric before commissioning.

OEM / ODM Service Process

1
Inquiry & Drawing Review
2
Sample & Approval
3
Production & MTC Issue
4
QC & Container Loading
 
Send your drawing, grade, radius type (LR/SR), and wall-thickness requirement. Our engineering team confirms feasibility against the production range and returns a technical proposal within 1–2 working days.

Factory Strength & Certification

32+
Years in Operation
500+
Staff
400+
Production Lines
medium frequency elbow pushing machine at Baode Steel factory

Elbow pushing line

vertical lathe machining stainless steel pipe fittings

Vertical lathe

pipe fittings heat treatment furnace

Heat treatment furnace

10000 ton hydraulic press for pipe fittings forming

10,000-ton hydraulic press

Equipment shown runs the pushing, machining, and heat-treatment stages behind this elbow. Full equipment list on the Produce Equipment page.

All three ISO certificates were issued Sep. 10, 2024 and are valid through Sep. 9, 2027, covering steel pipe and pipe fitting manufacturing. Full certificate scope on the Certificate page.

Quality Control Process

 
1
desktop spectrometer testing stainless steel chemical composition
Spectral Analysis

Every incoming heat is run through a desktop spectrometer to verify chromium, nickel, and molybdenum content against the ordered grade before it enters production.

2
90 degree stainless steel elbow ASME B16.9 dimensions
Dimensional Check

Machined pieces are checked against B16.9 dimensional tables - OD, center-to-end, and wall thickness - using calipers and an ultrasonic thickness gauge.

3
10000 ton hydraulic press for pipe fittings forming
NDT (UT)

Weld seams and bore surfaces are scanned with an ultrasonic flaw detector to catch subsurface porosity or inclusions before the elbow moves to the next stage.

4
pipe fittings heat treatment furnace
Mechanical Test

Sample pieces from each batch go through hardness testing and a universal testing machine to confirm mechanical properties match the grade's mill spec.

5
stainless steel elbow mill test certificate traceability
Pre-Ship Check

Before packing, a final visual and dimensional pass is run against the packing list, and the EN 10204 3.1 certificate is matched to the physical batch.

Client Cases

MARINE & OFFSHORE · REFERENCE DELIVERY

Coastal Desalination Plant - Seawater Intake & Brine Return Lines

An EPC contractor building a seawater desalination train needed NPS 2 (DN50) 90° long-radius elbows for the intake, dosing, and brine-return skids, where chlorinated seawater rules out carbon steel. We supplied ASTM A403 WP316L elbows to ASME B16.9 in Schedule 40S, each batch released with an EN 10204 3.1 Mill Test Certificate, with SGS witness inspection carried out before container loading. Dimensional records were submitted with the MTC package so the site QA team could log heat numbers straight into the piping isometric during commissioning.

1,850 pcs2″ 90° LR elbows, Sch 40S
21 daysEx-works lead time, drawings to loading
0Dimensional non-conformances at receiving

Logistics & After-Sales Support

 
Packaging Wooden cases for small items, wooden pallets for large items
 
Container Loading 20GP ≈18–22 t  /  40HQ ≈26–28 t per load
 
Lead Time 15–30 days after confirmation and deposit
 
Warranty 1 year, excluding misuse or improper installation

Frequently Asked Questions

What stainless steel grades do you offer for this 2-inch 90-degree elbow?

We stock 304, 304L, 316, 316L, and 321 for this size, plus duplex stainless steel on request for higher-chloride or higher-strength service. Grade selection affects lead time when a non-stocked chemistry is ordered in volume.

Which manufacturing standards does this elbow comply with?

Dimensions follow ASME/ANSI B16.9. We cross-check the same fitting against DIN/EN, JIS, and GOST tables, so it fits piping systems designed to any of these four standards without re-fabrication.

What is the MOQ and standard lead time for this product?

MOQ is 1 piece. Standard lead time is 15 days after order confirmation and deposit receipt; peak-season or non-stocked grade orders can run up to 30 days depending on volume.

Do you provide Mill Test Certificates and allow third-party inspection?

Yes. Every shipment carries a Mill Test Certificate under EN 10204 3.1 with chemical composition and mechanical test data. We also cooperate with third-party inspectors such as SGS, BV, or TÜV when a pre-shipment inspection is requested.

Do you supply this elbow as long radius (LR) or short radius (SR)?

Both LR and SR fall within our production range for this size. Please specify which type your drawing calls for when placing the order; standard listings default to long radius (LR) per ASME B16.9.

How is the elbow packaged, and how many pieces fit in a container?

Small items ship in wooden cases; larger volume orders go on wooden pallets. A 20GP container holds roughly 20 standard wooden cases (about 18–22 t total), and a 40HQ holds roughly 40 cases (about 26–28 t), depending on exact size mix.

How is the elbow packaged, and how many pieces fit in a container?

 

NEXT STEP

Send Your Drawing - Get a Technical Proposal in 1–2 Working Days

Share your grade, radius type (LR/SR), wall-thickness schedule, and quantity. Our engineering team confirms feasibility against the production range, quotes against current material cost, and returns a full technical proposal - dimensional data and MTC scope included.

MOQ 1 piece  ·  EN 10204 3.1 MTC with every shipment  ·  SGS / BV / TÜV inspection on request

Request a Quotation View Certificates

 

Hot Tags: 2 inch stainless steel 90 degree elbow, China 2 inch stainless steel 90 degree elbow manufacturers, suppliers, factory, stainless steel elbow

Send Inquiry
you dream it, we design it
We will find it for you as soon as possible
The product you need
contact us