Sanitary and non-toxic: The material is completely composed of carbon and hydrogen, without adding any toxic heavy metal salt stabilizers. The sanitary performance of the material has been tested by national authoritative departments.
Send Inquiry
Description
Technical Parameters
R = 1.5D elbows in ASTM A403 WP304, WP304L, WP316 and WP316L. Seamless 1/2"–24", welded 18"–48", wall 2–60 mm, in 45°, 90° and 180°. Compare short radius elbows or browse the stainless steel elbow range.
01
1.5D sweeping bend lowers friction loss against an R = 1.0D short radius elbow, so pumps push against less resistance in long process lines.
02
Four A403 grades, WP304 to WP316L. The low-carbon 316L limits intergranular attack at welds, giving fewer weld-zone corrosion problems in chloride and chemical service.
03
Heat treated, then tested by UT, RT and hydrostatic test. Defects surface at the factory, not on your installation site.
Specifications
Technical Specifications
Four tabs: materials, key sizes with order terms, the full dimension chart and weights.
R = 1.5D (LR). Short radius R = 1.0D also produced
Manufacturing standards
ASME B16.9, EN 10253, DIN 2605
Material grades
ASTM A403 WP304, WP304L, WP316, WP316L
Production range
Seamless OD 1/2"–24" · Welded OD 18"–48"
Wall thickness
2–60 mm (Sch 5S / 10S / 40S / 80S and special walls)
Forming
Hot pressed from heated pipe
Heat treatment
Quenching, normalizing and solution annealing, set by grade and order requirement
Key sizes
NPS
OD (mm)
90° LR, center-to-end A (mm)
45° LR, center-to-end B (mm)
1"
33.4
38
16
2"
60.3
76
31
3"
88.9
114
47
4"
114.3
152
63
6"
168.3
229
95
8"
219.1
305
127
12"
323.9
457
190
24"
609.6
914
380
Reference values per ASME B16.9. Confirm against the current edition and your drawing before ordering. Full list in the Dimension Chart tab.
Procurement information
MOQ
1 piece
Standard lead time
15 days (30 days in peak season)
Payment
30% deposit by T/T or L/C, balance before shipment
Warranty
1 year. Excludes damage from misuse or incorrect installation
Packing
Small items in wooden cases; large items on wooden pallets
Container loading
20GP: about 20 standard wooden cases (18–22 t) · 40HQ: about 40 cases (26–28 t)
NPS
OD (mm)
90° LR, center-to-end A (mm)
45° LR, center-to-end B (mm)
1/2"
21.3
38
–
3/4"
26.7
29
–
1"
33.4
38
16
1 1/4"
42.2
48
19
1 1/2"
48.3
57
24
2"
60.3
76
31
2 1/2"
73.0
95
39
3"
88.9
114
47
3 1/2"
101.6
133
55
4"
114.3
152
63
5"
141.3
190
79
6"
168.3
229
95
8"
219.1
305
127
10"
273.1
381
159
12"
323.9
457
190
14"
355.6
533
222
16"
406.4
610
253
18"
457.0
686
285
20"
508.0
762
316
24"
609.6
914
380
A = 1.5 × nominal pipe size (mm) for 90° LR elbows. Reference values per ASME B16.9.
NPS
LR 5S
LR 10S
LR 40S
LR 80S
SR 5S
SR 10S
SR 40S
SR 80S
1/2"
0.05
0.06
0.08
0.10
0.03
0.04
0.05
0.07
3/4"
0.06
0.07
0.09
0.11
0.04
0.05
0.06
0.07
1"
0.09
0.15
0.18
0.20
0.06
0.10
0.12
0.13
1 1/4"
0.13
0.20
0.25
0.35
0.09
0.13
0.17
0.12
1 1/2"
0.18
0.30
0.40
0.50
0.12
0.20
0.27
0.33
2"
0.30
0.50
0.70
0.90
0.20
0.33
0.47
0.60
2 1/2"
0.60
0.85
1.35
1.80
0.40
0.60
0.90
1.20
3"
0.90
1.30
2.00
2.90
0.60
0.90
1.35
1.90
4"
1.40
2.00
4.00
5.90
0.90
1.35
2.65
3.90
5"
2.90
3.60
6.50
9.70
1.95
2.40
4.35
6.50
6"
4.00
5.00
10.5
16.0
2.70
3.35
7.00
10.5
8"
7.40
10.0
21.5
33.5
4.90
6.70
14.5
22.5
10"
13.6
16.8
38.5
52.5
9.10
11.2
25.6
35.0
12"
23.4
27.0
59.0
79.0
15.6
18.0
39.5
53.0
14"
29.0
35.0
70.0
94.0
19.3
23.5
47.0
63.0
16"
41.3
47.0
95.0
125
27.5
31.5
63.5
84.0
18"
51.8
59.0
120
158
34.5
39.5
80.0
105
20"
73.0
85.0
146
194
49.0
57.0
98.0
129
24"
122
140
210
282
82.0
94.0
140
188
Reference weight per piece for 90° elbows by schedule, LR versus SR.
Key Features
What You Get with Every Long Radius Elbow
01
1.5D radius for smoother flow
Long radius means R = 1.5D. The fluid turns over a longer arc than in an R = 1.0D elbow, so friction and turbulence at the bend drop. On long process lines that means less pressure loss to overcome. Where space is tight, pick short radius elbows instead.
02
Hot-pressed forming, in-house heat treatment
Heated pipe is formed on medium frequency elbow pushing machines, then heat treated in our own furnaces to release forming stress and set mechanical properties. Quenching raises strength and hardness, normalizing refines the grain, and solution annealing restores corrosion resistance on stainless grades.
03
Pick the grade by the medium
WP304 covers most conventional environments. WP316 adds molybdenum for chloride-bearing media. WP316L suits welded systems. Full grade data sits on our Standards & Materials page.
Grade
Choose it for
WP304
General industrial and building lines, moderate cost
Every elbow passes through ultrasonic testing (UT), radiographic testing (RT) and hydrostatic testing. The test floor adds a direct-reading spectrometer, hardness and impact testers and an ultrasonic thickness gauge. See the test equipment list.
Configurations
Configuration Options
Six choices to fix before you request a quote.
01
Bend angle
45°, 90° or 180°.
A
02
Bend radius
Long radius R = 1.5D, or short radius R = 1.0D.
B
03
Pipe process
Seamless 1/2"–24" or welded 18"–48" outside diameter.
C
04
Wall thickness
2–60 mm, standard schedules or special walls.
D
05
Material grade
ASTM A403 WP304, WP304L, WP316, WP316L.
E
06
Drawings and marking
Buyer's drawings accepted. Custom marking on request.
F
LR vs SR
Long Radius vs Short Radius Stainless Steel Elbow
The only geometric difference is the bend radius. It decides flow behavior and footprint.
Bend radius, in pipe diameters (D)
Long radius (LR)
1.5D
Short radius (SR)
1.0D
Center-to-end, 90°, NPS 4
Long radius (LR)
152 mm
Short radius (SR)
102 mm
Item
Long Radius (LR)
Short Radius (SR)
Bend radius
R = 1.5D
R = 1.0D
Flow behavior
Lower friction, smoother flow
Higher resistance, compact turn
Best fit
Long runs where pressure loss matters
Tight spaces and compact layouts
Applications
Where Long Radius Stainless Steel Elbows Work Hardest
Chemical and process plants
Problem. Aggressive media attack weld zones first.
Fix. Specify WP316L: low carbon, lower risk of intergranular attack after welding.
Longer intervals between weld repairs.
Food and pharmaceutical lines
Problem. Weld quality and a clean bore decide whether a line passes audit.
Fix. WP316L elbows with 1.5D bends keep flow smooth through the turn.
Click each checkpoint to see the equipment behind it.
1
2
3
4
Step 1 of 4
Material check
Chemistry is verified on the direct-reading spectrometer before material goes to forming.
Step 2 of 4
Mechanical tests
Tensile and hardness tests run on the universal testing machine and hardness tester.
Step 3 of 4
Impact & microstructure
Impact testing and the metallographic microscope check toughness and grain structure.
Step 4 of 4
NDT, hydro & wall check
Ultrasonic testing (UT), radiographic testing (RT) and hydrostatic testing, with wall thickness confirmed by ultrasonic gauge.
Logistics & After-Sales
Packing, Shipping and Warranty
01
Packing
Small items in wooden cases. Large items on wooden pallets.
02
Container loading
20GP: about 20 standard wooden cases, 18–22 t. 40HQ: about 40 cases, 26–28 t.
03
Payment
30% deposit by T/T or L/C. Balance paid before shipment.
04
Warranty and support
1 year warranty, excluding misuse or incorrect installation. If a product fails the contract because of production, we propose a solution and cover the related repair cost.
FAQ
Long Radius Stainless Steel Elbow FAQ
Hover over a question to read the answer.
01
Which standards and material grades do you use for long radius stainless steel elbows?
+
We make LR stainless steel elbows to ASME B16.9, EN 10253 and DIN 2605. Standard grades are ASTM A403 WP304, WP304L, WP316 and WP316L. Tell us the medium and welding requirement and we will confirm the grade before quotation.
02
What is the difference between a long radius and a short radius stainless steel elbow?
+
The difference is the bend radius. A long radius elbow has R = 1.5D, which gives lower friction and smoother flow. A short radius elbow has R = 1.0D and suits tight spaces and compact layouts.
03
What heat treatment do hot-pressed stainless steel elbows get?
+
Heat treatment releases forming stress and sets mechanical properties. Quenching raises hardness and strength. Normalizing refines grain structure and evens out grain size. Stainless grades also undergo solution annealing to restore corrosion resistance. The route depends on grade and order requirement.
04
How do you check quality and corrosion resistance?
+
We run ultrasonic testing (UT), radiographic testing (RT) and hydrostatic testing, plus solution annealing to restore corrosion resistance. Our stated service life is over 50 years under rated temperature and pressure.
05
What are the MOQ, lead time and payment terms?
+
MOQ is 1 piece. Standard lead time is 15 days, and 30 days in peak season. Payment is a 30% deposit by T/T or L/C, with the balance paid before shipment.
06
What warranty do you offer?
+
1 year. Damage from misuse or incorrect installation is excluded. If a product fails the contract because of production, we propose a solution and cover the related repair cost.
07
Can you make elbows to my drawing or with custom marking?
+
Yes. Send the drawing or spec with NPS, schedule, grade, angle (45°, 90° or 180°) and quantity. Custom marking is available.
08
What sizes and wall thicknesses can you produce?
+
Seamless elbows from 1/2" to 24" OD and welded elbows from 18" to 48" OD, with wall thickness from 2 mm to 60 mm, in long or short radius.
1.5D
LONG RADIUS
Get a quote
Specifying long radius stainless steel elbows?
Send your drawing, grade and quantity. MOQ is 1 piece.