|
Product |
Stainless Steel Reducer 3 inch to 2 inch reducer |
|
Material |
Carbon steel: A234WPB, A420 WPL6 St37,St45, E24, A42CP, 16Mn, Q345, P245GH,P235GH, P265GH, P280GH, P295GH, P355GH ASTM 860 WPHY42, WPHY52, WPHY60, WPHY65,WPHY70, WPHY80 and etc. |
|
Stainless steel:A403 WP304,WP304L,WP316,WP316L,WP321 etc |
|
|
Alloy steel: A234 WP11,WP22,WP5,WP9,WP91, 10CrMo9-10, 16Mo3,12CrMoV,15CrMo etc. |
|
|
Wall Thickness |
SCH10,SCH20,SCH30,SCH40, SCH60, SCH80, SCH160, XXS |
|
Size |
1/2"-24" seamless, 24"-96" welded |
|
Standard |
GB, ANSI B16.9, EN10253-2, DIN2605, GOST17375-2001, JIS B2313, MSS SP 75,ASTM A234 etc |
|
Place of origin |
Tianjin,China |
|
Package |
Wooden box,wooden pallet or bare |
|
Surface |
Painted,Bare,Galvanized,FBE,3LPE Coated etc |
|
Application |
Chemical , power, construction, petroleum, gas, water, steam, |
|
Advantage |
Customerized dimensions to meet different requirement quality control from raw materials to the final products Abundant stock Rich export experience Good price |
|
Delivery |
By sea, By air and By express |
|
Lead time |
According to the quantities and specifications of each order; |
The center lines of the two ends of the concentric reducing Stainless Steel Reducer 3 inch to 2 inch reducer joint should coincide, and the allowable deviation of its eccentricity value is ± 5mm. The appearance of concentric reducing pipes Stainless Steel Reducer 3 inch to 2 inch reducer should not have cracks or double skin phenomenon, and the wall thickness at the small diameter end should be greater than that of the large diameter end pipe section. The allowable deviation of the size of concentric reducers shall comply with the technical standard GB/T12459 for seamless steel fittings. Reducing joints, also known as large and small heads, are used to connect circular steel pipes of different diameters. They are generally divided into two types: concentric reducing joints and eccentric reducing joints. When the two ports of the reducing joint are projected as concentric circles after it is erected, it is called a concentric reducing pipe, while the projection of the eccentric reducing pipe is that the small circle is offset from the outer circle
The roundness of the reducing Stainless Steel Reducer 3 inch to 2 inch reducer joint should not exceed 1% of the outer diameter of the corresponding end, and the allowable deviation is ± 3mm. There are two types of reducers: concentric and eccentric. Concentric reducers are generally used for vertical pipeline installation; Eccentric reducing joints are used for horizontal pipeline installation, and attention should be paid to indicating whether they are flat at the top or bottom.
Hot Tags: 3 inch to 2 inch reducer, China 3 inch to 2 inch reducer manufacturers, suppliers, factory, Stainless Concentric Reducer, 2 Inch To 1 Inch Pipe Reducer, ,
