Basic knowledge of flanges

Aug 06, 2025

Leave a message

A flange is a fitting used for removable connections between pipes, valves, and equipment, offering excellent sealing and pressure resistance. This detailed introduction to flanges, including standards, types, applications, and a comparison of sizes under different standards, will help you select the optimal product.

 

I. What is a flange?

1. Definition
A flange is a circular or square disc-shaped component that is connected together by bolts, gaskets, and flanges to connect or seal pipes, equipment, and other components.

2. Components
Flange body: Provides the foundation for mechanical connection and sealing.
Bolt holes: Insert bolts to secure the flange.
Sealing surface: Contacts the gasket to achieve a seal.

 

II. Flange Standard Classification
Different countries and regions use different flange standards, each specifying flange design, dimensions, tolerances, materials, and more. The main standards include:
1. National Standard (GB/T)
This is a Chinese standard. Commonly used standards include:
GB/T 9119-2010: Slip-on Flange
GB/T 9123.1-2000: Slip-on Flange with Neck
GB/T 9124-2010: Butt-weld Flange with Neck
HG/T 20592-2009: Steel Pipe Flange
2. American Standard (ASME/ANSI B16.5)
This American standard is widely used in international engineering projects and features a wide range of pressure ratings and strong versatility.
Class 150, 300, 600, 900, etc.
This standard specifies flange sizes from 0.5 inches to 24 inches.
3. German Standard (DIN EN 1092-1)
This German standard is also widely used in Europe and is divided into different pressure classes (PN). PN6, PN10, PN16, PN25, PN40 (pressure rating).

 

III. Flange Types
Flanges are classified by structure and connection method, with different types suitable for different working conditions.
1. Classification by Structure
Slip-on Flange:
• The pipe is inserted into the flange and welded, making it easy to install and suitable for low-pressure applications.
• Advantages: Low cost and easy installation.
• Disadvantages: Lower strength.

 

Weld Neck Flange:
• The flange neck is welded to the pipe and suitable for high-pressure and high-temperature applications.
• Advantages: High strength and good sealing after welding.
• Disadvantages: High manufacturing cost.

 

Threaded Flange:
• The flange is connected to the pipe through threads and is suitable for small-diameter, low-pressure applications.
• Advantages: No welding required.
• Disadvantages: Not suitable for high temperatures and high pressures.

 

Lap Joint Flange:
• Uses a loose-fitting connection for easy assembly and disassembly, suitable for frequent replacement.
• Advantages: Easy to install and disassemble.

 

Blind Flange:
• Used to seal pipe ends, no holes.
• Advantages: Excellent sealing, suitable for a wide range of pressure levels.

 

2. Classification by Sealing Surface Type
Flat Face (FF): Used in low-pressure applications.
Raised Face (RF): Commonly used in medium- and high-pressure applications.
Male-Female (M/F): Suitable for high pressures and high sealing requirements.
Ring Type Joint (RTJ): Suitable for extremely high pressures and high temperatures.

 

IV. Applications of Flanges
1. Pipe Connections: Used for connecting and sealing pipes.
2. Equipment Connections: For connecting pumps, valves, and other equipment to pipes.
3. Maintenance and Replacement: Bolted connections for easy disassembly.
4. High-Pressure Applications: Special flanges are used in high-pressure environments such as the petroleum and chemical industries.

 

V. Comparison of Different Standard Flange Sizes
1. Diameter Range
National Standard: DN10 - DN2000 (mm). ANSI: 1/2-inch - 24-inch.
DIN: DN10 - DN2000 (mm).
2. Number of Bolt Holes
GB: Generally fixed at 4, 8, or 12 holes.
GB: The number and layout of holes vary depending on the pressure level.
DIN: Similar to GB, the number of holes is linked to the pressure level.
3. Pressure Level
GB: PN designation (e.g., PN16).
GB: Class designation (e.g., Class 150).
DIN: PN designation, similar to GB.

 

VI. How to Choose a Flange
1. Select by Pressure Level
Low Pressure: Slip-On Flange, Threaded Flange.
High Pressure: Neck Weld Flange, Ring Joint Flange.
2. Select by Sealing
High Sealing Requirements: Concave and Concave Surface, Ring Joint Seal.
General Applications: Flat Sealing.
3. Select by Applicable Standard
Domestic Projects: GB Standard. International projects: American Standard (ANSI), German Standard (DIN).

 

VII. Advantages and Considerations of Flanges
Advantages
1. Reliable connection and good sealing.
2. Easy installation and disassembly.
3. Wide range of applications and diverse materials.
Precautions
1. Select the correct flange according to the pressure rating.
2. Bolts must be tightened evenly.
3. Select the appropriate gasket material.

Send Inquiry
you dream it, we design it
We will find it for you as soon as possible
The product you need
contact us