Welding diagrams for various flanges

Mar 07, 2025

Leave a message

Welding diagrams for various flanges

1:Weld Neck Flange

This flange is circumstantially welded into the system at its neck which means that the integrity of the butt welded area can be easily examined by radiography The bores of both pipe and flange match, which reduces turbulence and erosion inside the pipeline The weld neck is therefore favoured in critical applications

Weld Neck Flange

 

2: Slip-on Flange

This flange is slipped over the pipe and then fillet welded.Slip-on flanges are easy to use in fabricated applications.

slip on flange

3:Blind

This flange is used to blank off pipelines, valves and pumps, it can also be used as an inspection cover. it is sometimes referred to as a blanking flange

blind flange

4:Socket Weld

This flange is counter bored to accept the pipe before being fillet welded. The bore of the pipe and flange are both the same therefore giving good flow characteristics.

Threaded Flange

5:Lap Joint

These flanges are always used with either a stub end which is butt welded to the pipe with the flange loose behind it. This means the stub end always makes the face. The lap joint is favoured in low pressure applications because it is easily assembled and aligned. To reduce cost these flanges can be supplied without a hub and/or in treated, coated carbon steel

Lap Joint

6:Ring Type Joint

This is a method of ensuring leak proof flange connection at high pressures.A metal ring is compressed into a hexagonal groove on the face of the flange to make the seal. This jointing method can be employed on Weld Neck,Slip-on and Blind Flanges.

Ring Type Joint Flange

 

Send Inquiry
you dream it, we design it
We will find it for you as soon as possible
The product you need
contact us