Carbon Steel 8 Inch DN200 SCH40 Seamless 90 Degree LR Elbow ASME B16.9

Carbon Steel 8 Inch DN200 SCH40 Seamless 90 Degree LR Elbow ASME B16.9
Product Introduction:
Seamless carbon steel long-radius 90° elbow built for petrochemical, power, urban gas, and metallurgical pipeline projects, sized DN200 (8 inch) SCH40, manufactured to ASME B16.9. Our factory covers seamless elbows from 1/2" to 24" and welded elbows from 24" to 48", with wall thickness from 2mm to 100mm, backed by in-house physical/chemical testing - so buyers spend less time on back-and-forth material verification during project acceptance.
Send Inquiry
Description
Technical Parameters

Key Benefits

Formed by medium-frequency induction hot-pushing (900-950°C), achieving 92% material utilization - 15% higher than conventional processes - for more consistent wall thickness and less rework risk during on-site installation.

Manufactured to ASTM A234 WPB, verified with eddy current testing, ultrasonic thickness gauging, impact testing, and universal material testing equipment, giving your project acceptance team traceable mechanical performance data.

product-1288-568
product-1508-714

Certified to ISO9001, ISO14001, and ISO45001, and rated as an AAA Credit Enterprise - so your procurement process stays auditable end to end.

Available with sand-blasting & painting or hot-dip galvanized finish, matching different corrosion-protection requirements without sourcing a separate finishing supplier.

Annual output of over 20,000 tons of pipe fittings and 50,000 tons of pipe material throughput, giving the production capacity to support bulk project orders.

7x12-hour sales support from a team with 2+ years of industry experience each, shortening the time from inquiry to confirmed order.

Technical Parameters

Parameter Value / Notes Factory OD Coverage Seamless: 1/2"-24"; Welded: 24"-48"
Product Name Carbon Steel 8 Inch DN200 SCH40 Seamless 90 Degree LR Elbow Factory Wall Thickness Coverage 2mm-100mm
Applicable Standard ASME B16.9 Surface Treatment Sand blasting & painting / Hot-dip galvanized
Nominal Size DN200 (8 inch) Forming Process Medium-frequency hot-pushing (DN50-DN600) / Stamping (for thick-wall & special sizes)
Schedule / Wall Thickness SCH40 (exact wall thickness in mm: [TO BE CONFIRMED]) Lead Time (incl. peak-season variance) Standard delivery time: 15 days; maximum delivery time: 30 days.
Type Seamless, Long Radius (LR), 90° elbow; also available in 45°/180°, LR/SR, seamless/butt-welded combinations Warranty 1 year (excluding improper operation or installation)
Material Grade ASTM A234 WPB (carbon steel) Container Loading / Logistics Unit A 20GP container typically holds 20 standard wooden crates (approx. 18–22 tons), while a 40HQ container typically holds 40 standard wooden crates (approx. 26–28 tons)

Product Features & Advantages

Carbon steel elbow hot pressing forming process - Baode Steel

 

Medium-Frequency Hot-Pushing for More Consistent Wall Thickness

Formed by medium-frequency induction heating (900-950°C) combined with push-machine forming (Feature) - achieving 92% material utilization, 15% higher than conventional methods, at up to 60 pieces/hour (Advantage) - so you receive batches with more uniform wall thickness, cutting down on re-verification costs during on-site installation (Benefit).

Stamping Process for Thick-Wall & Special-Size Elbows

For 2mm-30mm thick-wall or non-standard elbows, we use cold/hot stamping with multi-edge ring-shell pressure forming technology (Feature), shortening the manufacturing cycle by 30%-50% (Advantage) - meaning small-batch, non-standard thick-wall elbows common in project procurement can be delivered faster than standard scheduling allows (Benefit; exact lead time to be confirmed by sales).

product-954-368
product-478-496

Full Material Range - From Carbon Steel to High-Temperature Alloy

This page's product is ASTM A234 WPB carbon steel; the same factory also produces ASTM A420 WPL6 (low-temperature service alloy steel), ASTM A182/A234 WP5/WP9/WP11/WP22/WP91 (high-temperature service alloy steel), and ASTM A182 F304/F316L, A403 WP304/WP316, UNS31803 duplex stainless steel (Feature) - covering ambient to high/low-temperature service and carbon to corrosion-resistant stainless materials (Advantage), so you can source elbows for multiple process stages from one supplier and cut multi-vendor coordination costs (Benefit). See our Alloy Steel Elbow and Stainless Steel Elbow series for other materials.

 

Triple ISO Certification + AAA Credit Enterprise - Auditable Procurement

We hold ISO9001 (quality management), ISO14001 (environmental management), and ISO45001 (occupational health & safety, formerly OHSAS18001) certification, and are rated an AAA Credit Enterprise (Feature) - allowing your team to directly verify our credentials during supplier audits and project acceptance (Advantage), reducing compliance risk from unverifiable qualifications (Benefit).

Baode Steel AAA credit enterprise and ISO certificates
product-500-296

Full In-House Testing Lab - Verifiable Material Data

Our factory is equipped with a full-element spectrometer, hardness tester, impact testing machine, metallographic microscope, ultrasonic flaw detector, ultrasonic thickness gauge, and universal testing machine (Feature), allowing composition and mechanical property testing on every batch (Advantage) - giving buyers who need a Material Test Certificate (MTC) for project acceptance the data to back it up (Benefit; exact report format to be confirmed by sales).

Available Options & Customization

Option Range Available
Bend Angle 90° / 45° / 180°
Radius LR (Long Radius) / SR (Short Radius)
Connection Seamless / Butt Welded
Surface Treatment Sand blasting & painting / Hot-dip galvanized
Size Range Seamless 1/2"-24"; Welded 24"-48"; wall thickness 2mm-100mm
Material Options ASTM A234 WPB (this page); also WPL6 low-temp alloy steel, WP5/WP9/WP11/WP22/WP91 high-temp alloy steel, F304/F316L and duplex stainless steel series
   

Application Scenarios

Petrochemical Pipeline Projects - Traceable Material, Smooth Acceptance

Petrochemical buyers' biggest concern is incomplete material documentation that fails third-party acceptance. This elbow is manufactured to ASTM A234 WPB, backed by data from our in-house spectrometer, hardness tester, and impact testing equipment - helping your team verify material traceability and avoid repeated back-and-forth during project acceptance.

product-776-422

 

 

Power & Thermal Grid Retrofit Projects - Bulk Supply Capacity

Power and thermal grid retrofits usually run on tight schedules, and buyers worry about supply shortfalls. Our factory operates 420+ sets of key equipment, including push machines, vertical lathes, and a 10,000-ton hydraulic press, producing over 20,000 tons of pipe fittings per year - giving us the production base to support phased bulk-project deliveries (exact batch lead times to be confirmed by sales scheduling).

 

Urban Gas & Metallurgical Pipe Systems - Compliance-Ready Test Reports

Urban gas and metallurgical buyers typically need third-party or in-house inspection reports for compliance. Our equipment includes an ultrasonic flaw detector, ultrasonic thickness gauge, and universal testing machine, allowing in-house non-destructive testing and mechanical verification to support your compliance documentation (exact report format and cost to be confirmed by sales).

product-792-402

OEM/ODM Service

We support custom production per customer drawings/specifications, covering seamless elbows from 1/2" to 24" and welded elbows from 24" to 48", across ASTM A234 WPB carbon steel, A420/A182 series alloy steel, F304/F316L, and duplex stainless steel, with sand-blasting/painting or hot-dip galvanized finish combinations. 

Purchase Info at a Glance

MOQ Lead Time Warranty Core Certification
1 item Standard delivery time: 15 days; maximum delivery time: 30 days. 1 year (excluding improper operation or installation) ISO9001 / ISO14001 / ISO45001 / AAA Credit Enterprise

Send Inquiry / Get Quote WhatsApp Us

Factory Strength & Certification

Tianjin Baode Steel Co., Ltd. was established in 2006, formerly known as Cangzhou Junde Steel Pipe Co., Ltd., and was officially renamed Tianjin Baode Steel Co., Ltd. in 2019. Our fittings manufacturing base, Hongcheng Pipe Industry Co., Ltd., was established in 1992, covers 100,000 square meters, and employs 520 staff, including 3 senior engineers, 12 engineers, and 150 technical personnel. Annual output of pipe fittings exceeds 20,000 tons, with pipe material throughput over 50,000 tons, and products are exported to more than 40 countries and regions across Southeast Asia, Central Asia, North Africa, and South America. See our About Us page for more.

Medium frequency elbow pushing machine at Baode Steel factory 10000 ton hydraulic press at Baode Steel factory ISO9001 quality management system certificate - Baode Steel

Customer Cases& After-Sales Service

exhibition photo of alloy steel reducer.jpgcustom photo of a234 wpb tee.jpg

Logistics

Stage Service
Pre-sales Product explanation, Q&A, solution proposals, quotation
During sales Timely production progress updates, multiple payment methods, shipment tracking
After-sales Shipping schedule updates, pre-arrival reminders, customer follow-up service

FAQ

Q1: Do you provide certificates for customs clearance and project acceptance?

A: We hold ISO9001, ISO14001, ISO45001, and AAA Credit Enterprise certification. Material Test Certificate (MTC) availability and specific clearance documents

Q2: Can you produce custom sizes, angles, or surface treatments?

A: Yes. We cover seamless elbows from 1/2" to 24" and welded elbows from 24" to 48", wall thickness 2mm-100mm, with sand-blasting & painting or hot-dip galvanized finish options, in 90°/45°/180°, LR/SR configurations.

Q3: Can you supply other materials or grades in the same elbow series?

A: Yes. Besides ASTM A234 WPB carbon steel, we also produce ASTM A420 WPL6, ASTM A182/A234 WP5/WP9/WP11/WP22/WP91 alloy steel, and ASTM A182 F304/F316L, A403 WP304/WP316, UNS31803 duplex stainless steel elbows.

Q4: What quality inspection do you perform before shipment?

A: Our factory is equipped with a spectrometer, hardness tester, impact testing machine, metallographic microscope, ultrasonic flaw detector, ultrasonic thickness gauge, and universal testing machine for chemical composition and mechanical property verification. Specific pre-shipment inspection report format: [TO BE CONFIRMED].

Get a Quote

Contact our sales team for a detailed quotation, material certification, or a custom solution for the Carbon Steel 8 Inch DN200 SCH40 Seamless 90 Degree LR Elbow ASME B16.9.

Send Inquiry WhatsApp: +86 133 0317 1370 Email: export@jundesteelpipe.com

 

Hot Tags: carbon steel 8 inch dn200 sch40 seamless 90 degree lr elbow asme b16.9, China carbon steel 8 inch dn200 sch40 seamless 90 degree lr elbow asme b16.9 manufacturers, suppliers, factory, low pressure carbon steel elbow, carbon steel elbow in stock, pressure resistant carbon steel elbow, carbon steel elbow for industrial piping, seamless carbon steel elbow, carbon steel elbow supplier

Send Inquiry
you dream it, we design it
We will find it for you as soon as possible
The product you need
contact us