ASTM A403 WP304L Stainless Steel 90 Degree LR Elbow

ASTM A403 WP304L Stainless Steel 90 Degree LR Elbow
Product Introduction:
ASTM A403 WP304L Stainless Steel 90 degree LR elbow
Send Inquiry
Description
Technical Parameters
 

Low-carbon 304L construction for welded piping runs where intergranular corrosion at the weld zone is a real risk. Produced seamless 1/2″-24″ or welded 24″-100″, wall thickness SCH10S-SCH160, under an ISO 9001 / ISO 14001 / ISO 45001 quality system.

✓Low-carbon WP304L limits carbide precipitation at weld heat-affected zones
✓Seamless and welded production under one spec, 1/2″ to 100″
✓Wall thickness SCH10S-SCH160 for low-pressure to heavy-duty service
✓LR / SR / 2D / 3D / 5D bend radius options available
✓SGS / BV / TUV third-party inspection supported before shipment
✓Manufactured since 2006, 139 staff, 18 sets of production equipment
MOQ
1 piece
Lead Time
15-30 days
Warranty
1 year
Certification
ISO 9001
Request a Quote
 
ASTM A403 WP304L stainless steel 90 degree LR elbow product photo
90° LR · WP304L

Technical Specifications

ASTM A403 WP304L Stainless Steel 90° LR Elbow - dimensional, material and purchasing data

Item Specification
Product Type Elbow
Degree 45°, 90°, 180° etc.
Radius Type Long Radius (LR), Short Radius (SR), 2D, 3D, 5D etc.
Outside Diameter – Seamless 1/2″ – 24″
Outside Diameter – Welded 24″ – 100″
Wall Thickness SCH10S – SCH160
Nominal Pipe Size / Pressure Class (DN/PN)  Please provide project spec sheet for exact DN/PN mapping
Working Temperature Range  Depends on wall thickness and grade – confirm with sales
Weight per Unit  Varies by size and wall thickness

Why This Elbow Holds Up in Service

Six verifiable reasons buyers specify this fitting on corrosive and high-purity lines

01

Low-Carbon Grade Cuts Weld-Zone Corrosion Risk

WP304L keeps carbon content at or below 0.03%, which reduces chromium-carbide precipitation during field welding. Fewer carbides at the heat-affected zone means less intergranular attack in corrosive service.

02

One Spec Covers Seamless and Welded Sizes

Seamless production runs 1/2″ to 24″; welded production extends 24″ to 100″. Instrument piping and large header runs can be sourced from a single supplier on a single PO.

03

Wall Range Matches Duty Without Re-Specifying

SCH10S covers light sanitary and low-pressure runs; SCH160 covers heavy-wall, higher-pressure service. Buyers pick wall thickness by duty, not by what one mill happens to stock.

04

Radius Options Control Flow Turbulence

LR, SR, 2D, 3D and 5D bend radii are available. A longer radius smooths the flow path through the direction change, which matters on continuous-flow lines prone to erosion at fittings.

05

Third-Party Inspection Before Container Loading

Production runs under ISO 9001 / ISO 14001 / ISO 45001, and shipments support SGS, BV, or TUV inspection prior to loading - documentation your customs broker and QA team can act on directly.

06

In-House Production Since 2006

139 staff, 18 sets of production equipment and 4 in-house engineers run pushing, bending, heat treatment and machining internally - fewer subcontracted handoffs, more control over batch-to-batch dimensions.

Application Scenarios

Where WP304L long radius elbows are typically specified

Oil and gas processing elbow

 

Sour and Corrosive Service Piping

Upstream and midstream operators routing H₂S-bearing or high-chloride streams need fittings that will not develop intergranular attack after field welding, especially at tie-in points where heat input is harder to control.

WP304L's capped carbon content addresses exactly this failure mode, and the elbow is available in the same seamless/welded size range used across gathering lines and process headers.

Pair with our stainless steel tees and WN flanges for a matched corrosion-resistant piping package.

OEM / ODM Cooperation Process

Custom branding, marking and project-specific specifications available on request

 
1
Inquiry & Needs
2
Design Proposal
3
Sample Confirmation
4
Bulk Production
5
QC & Delivery
Send your size, grade, standard, and target quantity. Our sales engineers confirm feasibility against current production capacity within 1 business day.
We propose material grade, wall thickness, radius type and any custom marking or branding, referencing the specification tables above.
A sample or first-article piece is produced for dimensional and material verification before bulk tooling is committed.
Bulk production runs across our seamless and welded elbow lines with in-line dimensional checks at each stage.
Final inspection, third-party verification if requested (SGS/BV/TUV), then packing and container loading per the Purchase Info terms above.

Factory Strength & Certification

Tianjin Baode Steel Co., Ltd - manufacturing pipe fittings since 2006

0
Years in Manufacturing
0
Production & Technical Staff
0
Sets of Production Equipment
0
In-House Engineers
10000 ton hydraulic press
10,000-ton hydraulic press - forming line
Vertical lathe machining
Vertical lathe - precision machining

Certifications

 
productcate-1-1
ISO 9001
No. 1952024Q0837R0SValid: 2024-09-10 to 2027-09-09
productcate-1-2
ISO 14001
No. 1952024E0437R0SValid: 2024-09-10 to 2027-09-09
productcate-1-3
SO 45001
No. 1952024S0379R0SValid: 2024-09-10 to 2027-09-09

Quality Control Process

Click a stage to see the equipment and check performed

 
1
Material Check
2
Dimension Check
3
Non-Destructive Test
4
Mechanical Test
5
Final Inspection
product-922-388

1. Material Composition Check

Incoming stainless steel raw material is verified on our all-element desktop spectrometer to confirm alloy composition matches WP304L before any cutting or forming begins.

2. In-Process Dimension Check

Outside diameter, wall thickness and center-to-end dimensions are checked at set intervals during pushing and machining to catch drift before a full batch is affected.

3. Non-Destructive Testing

Ultrasonic flaw detection and eddy current testing screen for internal and surface defects on welded elbows before they move to final finishing.

4. Mechanical Property Test

Sample pieces are pulled on a universal testing machine and checked for hardness to confirm the material still meets ASTM A403 mechanical requirements after forming.

5. Final Inspection & Packing

A final visual and dimensional check precedes packing. Third-party inspection (SGS/BV/TUV) can be arranged at this stage on request before container loading.

Delivery Record

Client Industry & Region Water Treatment - Seawater Reverse Osmosis Desalination/SAUDI ARABIA
Project Challenge Large-diameter thin-wall elbows for high-chloride seawater intake. Client required BV third-party inspection, PMI on every fitting, and 100% radiographic testing on welded seams.
Solution Provided Welded elbows produced from WP304L plate with full-penetration welds. 100% RT on all weld seams, PMI on each piece, and BV inspector present during final inspection. All fittings packed on wooden pallets with individual plastic wrap.
Delivery Result 76 pcs shipped in 1 × 40HQ container. BV inspection certificate issued. Delivered within 28 days. All fittings accepted at site with full documentation package.

Logistics & After-Sales

Shipping, packing and support terms for international orders

☐

Packing

Woven bag/plastic film per piece; wooden box for small sizes, wooden pallet for large sizes.

🚚

Container Loading

20GP ≈ 20 wooden boxes (18-22 tons); 40HQ ≈ 40 wooden boxes (26-28 tons).

⏰

Lead Time

15 days standard; up to 30 days in peak season, depending on order size.

🔧

Warranty & Support

1-year warranty (excludes misuse/improper installation). Reply within 24 hours on after-sales queries.

Frequently Asked Questions

Common questions from buyers sourcing ASTM A403 WP304L elbows

+
What steel grades and standards do you supply for these elbows?
We manufacture stainless steel elbows to ASTM A403, with WP304, WP304L, WP316, WP316L and WP321 in stock production. Other grades can be produced against your project specification - share your material call-out and we will confirm feasibility and lead time.
+
What size range do you produce, seamless versus welded?
Seamless 90° LR elbows run 1/2″ to 24″. Above 24″ up to 100″, we produce welded elbows. Wall thickness covers SCH10S to SCH160 across both ranges, so wall thickness selection depends on your pressure and temperature duty rather than the production method.
+
Do you support third-party inspection, and what certifications do you hold?
Yes - we support internationally recognized third-party inspection including SGS, BV and TUV before shipment. Our factory holds ISO 9001, ISO 14001 and ISO 45001 (certificate numbers and validity dates in the Factory Strength section above), plus AAA Credit Enterprise status.
+
What is your MOQ, and how does pricing scale with order size?
Minimum order quantity is 1 piece, which suits sample orders and spare-parts purchasing. Unit pricing improves at container-load quantities (20GP/40HQ) - send your target size mix and quantity for a formal quote.
+
How do you pack the elbows to prevent damage during international transit?
Each elbow is wrapped in woven bag or plastic film. Smaller sizes go into wooden cases; larger sizes are secured on wooden pallets. Custom shipping marks can be applied on request, and a 20GP typically holds about 20 wooden boxes (18-22 tons) while a 40HQ holds about 40 (26-28 tons).
+
What are your accepted trade terms and payment methods?
We offer EXW, FOB, CNF and CIF trade terms. Accepted payment methods are T/T or irrevocable L/C at sight. Let us know your preferred incoterm when requesting a quote so freight can be included where relevant.
+
Can you produce elbows with custom branding or project-specific marking?
Yes. Marking on each elbow is applied according to the client's requirement, and OEM/ODM cooperation follows the five-step process shown above - inquiry, design proposal, sample confirmation, bulk production, then QC and delivery.
+
Is WP304L necessary, or would standard WP304 work for my project?
If your line will be field-welded and carries corrosive or high-chloride media, WP304L's lower carbon content reduces the risk of carbide precipitation at the weld heat-affected zone. For non-welded or less corrosive applications, standard WP304 may be sufficient and lower cost - share your service conditions and we can advise on grade selection.

Ready to Specify This Elbow for Your Project?

Send your size, grade, standard and quantity - our engineers respond within 1 business day with feasibility and a formal quote.

Request a Quote
 

 

Hot Tags: astm a403 wp304l stainless steel 90 degree lr elbow, China astm a403 wp304l stainless steel 90 degree lr elbow manufacturers, suppliers, factory, stainless steel elbow

Send Inquiry
you dream it, we design it
We will find it for you as soon as possible
The product you need
contact us