

Core standards and steel grades for alloy pipe fittings
1, International Core Standard System (ASTM series)
1. High temperature alloy pipe fittings (suitable for thermal power and petrochemical high-temperature pipelines)
|
Standard No. |
Grade |
Fitting Type |
Core Performance |
Application Scenarios |
|
ASTM A335 (Pipe) |
P1 |
Seamless Alloy Pipe |
Chromium-molybdenum low alloy, temp ≤450℃ |
Boiler superheaters, medium-temperature medium-pressure pipelines |
|
P11 |
Seamless Alloy Pipe |
Cr-1.25%, Mo-0.5%, creep-resistant |
Refinery heater pipelines |
|
|
P12 |
Seamless Alloy Pipe |
Chromium-molybdenum alloy, cost-effective |
Chemical high-temperature medium transportation pipelines |
|
|
P22 |
Seamless Alloy Pipe |
Cr-2.25%, Mo-1.0%, high strength |
Ultra-supercritical thermal power pipelines, hydrogenation units |
|
|
P91 |
Seamless Alloy Pipe |
Martensitic heat-resistant steel, temp ≤650℃ |
Ultra-supercritical unit main steam pipelines |
|
|
ASTM A234 (Fittings) |
WP1/WP11/WP12/WP22/WP91 |
Elbows, tees, reducers |
Matches ASTM A335 pipes, excellent weldability |
High-temperature pipeline system connectors |
|
ASTM A182 (Flanges/Forgings) |
F1/F11/F12/F22/F91 |
Flanges, socket weld fittings |
Forged alloy steel, reliable sealing performance |
High-temperature high-pressure flange connections |
1.2 Alloy Pipe Fittings for Low-Temperature Applications
(Suitable for LNG, cryogenic equipment)
|
Standard No. |
Grade |
Fitting Type |
Core Performance |
Application Scenarios |
|
ASTM A333 (Pipe) |
Gr.6 |
Seamless Alloy Pipe |
Nickel alloy reinforcement, temp ≥-45℃ |
LNG transportation pipelines, LNG storage tank exports |
|
Gr.3 |
Seamless Alloy Pipe |
Low-temperature impact toughness ≥27J |
Refrigeration system pipelines |
|
|
ASTM A420 (Fittings) |
WPL6/WPL3 |
Elbows, tees |
Matches ASTM A333 pipes, no brittle fracture risk |
Cryogenic medium transportation fittings |
|
ASTM A350 (Flanges) |
LF2/LF3 |
Forged Flanges |
Excellent low-temperature toughness, stress corrosion resistance |
Low-temperature pipeline flange connections |
1.3 Corrosion-Resistant Alloy Pipe Fittings
(Suitable for chemical engineering, marine environments)
|
Standard No. |
Grade |
Fitting Type |
Core Performance |
Application Scenarios |
|
ASTM A312 (Pipe) |
TP304/304L |
Austenitic Stainless Steel Pipe |
Cr18%, Ni8%, general corrosion resistance |
Chemical acid/alkali medium transportation |
|
TP316/316L |
Austenitic Stainless Steel Pipe |
Mo addition, chloride ion corrosion resistance |
Offshore platform pipelines, brine treatment |
|
|
TP321 |
Austenitic Stainless Steel Pipe |
Titanium stabilization, intergranular corrosion resistance |
High-temperature corrosive environments (e.g., nitric acid plants) |
|
|
ASTM A403 (Fittings) |
WP304/WP316/WP321 |
Elbows, flanges, pipe supports |
Matches ASTM A312 pipes, consistent corrosion resistance |
Corrosive medium pipeline connectors |
|
Special Alloys |
Inconel 625 |
Seamless Fittings |
Nickel-based alloy, extreme corrosion resistance |
Strong acid, high-temperature high-pressure corrosive environments |
Core Domestic Standard System (GB/T Series)
2.1 Steel Butt-Weld Fittings (New Standard GB/T 13401-2025)
Key Revisions: Added 9 new alloy material grades (including P91/P92 high-alloy steels), aligned with international ASTM standards, supporting emerging scenarios such as deep-sea petroleum and ultra-high pressure power generation.
Key Grade Correspondences:
16Mn (Low Alloy) → Corresponding to ASTM A335 P1, suitable for boilers and pressure vessels;
15CrMo (Chromium-Molybdenum Steel) → Corresponding to ASTM A335 P12, suitable for high-temperature steam pipelines;
12Cr1MoV (High-Strength Alloy) → Corresponding to ASTM A213 T11, suitable for main thermal power pipelines;
Mandatory Requirements: Impact toughness of fittings for low-temperature conditions (≤-196℃) ≥27J; austenitic stainless steel fittings shall undergo grain size inspection.
2.2 Alloy Steel Flange Standards (GB/T 9124.2-2019)
Scope of Application: Full-process specifications for materials, manufacturing, and inspection of alloy steel flanges, ensuring connection reliability under high-temperature and corrosive conditions.
Core Material Requirements:
Chromium-Molybdenum Steel Series: Control Cr content (1.25%-2.25%) and Mo content (0.5%-1.0%) to improve high-temperature creep resistance;
Low-Temperature Alloys: Add nickel elements to ensure low-temperature impact energy meets standards and avoid brittle fracture;
Inspection Requirements: Must pass ultrasonic testing (internal defects), magnetic particle/penetration testing (surface defects), with dimensional tolerance and sealing surface roughness strictly matching pressure levels.
Core Principles for Grade Selection
Working Condition Matching: Prioritize P11/P22/P91 grades for high temperatures (>400℃); select ASTM A333 Gr.6/A420 WPL6 for low temperatures (℃); choose 316L/Inconel 625 for corrosive environments.
Standard Coordination: Pipes, fittings, and flanges shall follow the same standard system (e.g., ASTM or GB/T) to avoid welding failure caused by grade mismatch.
International Integration: Prioritize ASTM standards for export projects (e.g., ASTM A234 WP series); domestic projects can adopt GB/T 13401-2025 (aligned with ASME B16.9).
Quick Reference Table of Common Grades
|
Domestic Steel Grade |
International Corresponding Grade |
Standard Basis |
Typical Application |
|
20# |
ASTM A106 Gr.B |
GB/T 8163 |
Medium-Low Temperature Medium-Pressure Pipelines |
|
16Mn |
ASTM A335 P1 |
GB/T 13401-2025 |
Boilers, Pressure Vessels |
|
15CrMo |
ASTM A335 P12 |
GB/T 9948 |
High-Temperature Steam Pipelines |
|
12Cr1MoV |
ASTM A213 T11 |
GB/T 5310 |
Main Thermal Power Pipelines |
|
09MnNiD |
ASTM A333 Gr.6 |
GB/T 18984 |
LNG Low-Temperature Pipelines |
